Thước đo cao điện tử Digimicro Nikon MF-501

Danh mục:

Máy đo 2D - Máy đo 3D

Từ khóa:

3d vina , bán Digimicro Nikon MF-501 , Digimicro Nikon MF-501 , hiệu chuẩn , hiệu chuẩn thiết bị , máy đo 2d , máy đo 3d , máy đo cmm , sửa máy đo 2d , sửa máy đo 3d , sửa máy đo cmm

Vận chuyển giao hàng toàn quốc

Phương thức thanh toán linh hoạt

Gọi ngay 0974.692.294 để mua và đặt hàng nhanh chóng

Mô tả sản phẩm

Highlights Measuring length equal to 50mm Accuracy of 1 micron at 20°C Readings as small as 0.1 µm or even 0.01 µm can be made depending on the counter RS-232 and printer output are standard features TC-101 counter More compact and accurate than previous models Smallest readable value is 0.01µmCan be used with old-type digital micrometers and rotary encoders Superior cost performance RS-232C output and printer output are standard features MFC-101 counter A compact, single shaft counter for exclusive use with the MF-501 and MF-1001 with display and resolution switching, direction switching, and display unit switching functions Can be attached to the head or placed outside RS-232C output and printer output are standard features Specifications

Readable travel: 50 mm (2”)Minimum readout value: 0.1 µm (switchable determined by the counter used) Measuring angle: Useable in down or sideways position Measuring force – variable: Down 115-165 gf; Lateral 66-125 gf Response speed: 500 m/second or better TC-101 Table-top Counter tech specs:

Inches/mm: Inch or Metric (switchable)
Display: 10-segment LED display
Minimum readout: 0.01, 0.05, 0.1, 0.5, 1.0 micron (0.0000005", 0.000002", 0.000005", 0.00002", 0.00005") dip switch on back
Functions: Zero reset button on front, preset, pulse check, zero blanking
RS232: RS232 output (with optional cable)
Power: 12 V DC adapter - available in 120 V or 240 V models
Optional: Extension cable 2 m (6 ft) counter to Digimicro head

MFC-101 Compact Counter tech specs:

Mounting: Can be mounted directly on the Digimicro
Inches/mm: Inch or Metric (switchable)
Display: 7-segment LED display
Minimum readout: 0.1, 0.5, 1.0 ,ocrpm (0.000005", 0.00002", 0.00005") setting by switch on back
Reset: Zero reset button on front
RS232: RS232 output (with optional cable)
Power: 12 V DC adapter - available in 120 V or 240 V models