Thiết bị đo lực kéo nén SHIMPO FGS-50XB-L/H

Danh mục:

Thiết bị đo cầm tay

Từ khóa:

3d vina , hiệu chuẩn , hiệu chuẩn thiết bị , máy đo 2d , máy đo 3d , máy đo cmm , sửa máy đo 2d , sửa máy đo 3d , sửa máy đo cmm

Vận chuyển giao hàng toàn quốc

Phương thức thanh toán linh hoạt

Gọi ngay 0974.692.294 để mua và đặt hàng nhanh chóng

Mô tả sản phẩm

FGS-50XB-L/H – Motorized Test Stands for Digital Force Gauges (Horizontal Type)

Various movement modes are available for the digital force gauge (push-pull gauge), e.g. jogging and repeated reciprocation, according to the purpose of measurement and the intended use of the test object. Five positions and stopping times are programmable. An analog output enables a connection to a pen recorder to record the displacement. Provided with an emergency stop switch to support a safe test environment.

Features

Various movement modes are available for the force gauge, e.g. jogging and repeated reciprocation, according to the purpose and intended use.
Equipped with an analog output to record the displacement. (There is also a series with a length measuring unit capable of displaying moving distances to two decimal places.)
Capable of stepless travel speed adjustment.
Ten positions and stopping times are programmable.
It is possible to stop the movement with a comparator output signal (when an FGX Series force gauge is mounted).
Equipped with an emergency stop switch.

Specifications

form	Horizontal
	For low speed	For high speed
	FGS-50XB-L	FGS-50XB-H
Load capacity	500.0(50kg)
Feed rate	5〜120mm / min	20〜500mm/min
Feed rate	2 types of speed switching possible steplessly
stroke	140mm (with mechanical backlash of 0.2-0.5mm)
Representation: moving speed representation	5.0~120.0mm / min	20.0~500.0mm / min
Movement distance indication	0.0〜140.0mm
Repeat count display	0〜9999
Output signal	Analog voltage output: Outputs the amount of movement of the stand 10mV/mm MAX.±1.4V RS-232C
input	Overload input: FGX, FGP overload output stops the stand
alarm	Stop the motor when the stand motor is overloaded
Height adjustment range	0〜35mm
Measurement table	100 × 125mm
Operating temperature limit	0 to 45°C (with no condensation)
power supply	AC100V(±10%）2.5A
quality	22kg
accessories	Power supply AC socket for force gauge, FGP connection cable, analog output cable
Other	Emergency stop switch