Thiết bị đo lực kéo nén để bàn SHIMPO FGS-50E

Danh mục:

Thiết bị đo cầm tay

Từ khóa:

3d vina , hiệu chuẩn , hiệu chuẩn thiết bị , máy đo 2d , máy đo 3d , máy đo cmm , sửa máy đo 2d , sửa máy đo 3d , sửa máy đo cmm

Vận chuyển giao hàng toàn quốc

Phương thức thanh toán linh hoạt

Gọi ngay 0974.692.294 để mua và đặt hàng nhanh chóng

Mô tả sản phẩm

FGS-50E – Motorized Test Stands for Force Gauges (Vertical Type)

Features

Four operational modes are available

Two travel speed ranges

Two travel speed ranges are available to be selected from: low-speed type (6 – 108 mm/min) and high-speed type (20 – 600 mm/min).

Universal voltage

Front cover for safety Easy operation

Everything from the display (LCD) to various settings has been made easier to see and to operate.

series	FGS-50E
Type	FGS-50E-L (low speed type)	FGS-50E-H (High-speed type)
Measured load	500N（50kg）
Load capacity	500N（50kg）
Feed rate	6-180mm/min	20-600mm / min
Speed setting	Set the speed on the operation panel
stroke	400mm
Display Department	LCD 3 digits, moving speed, operation mode are displayed
Moving speed	6-180mm/min	20-600mm / min
action mode	Manual (MAU), inching (JOG), 1 cycle (SIG), reciprocating repeat (CON)
input	Overload input Stop at FGPX (FGP) overload signal
Measurement table	150 × 93mm
Operating temperature limit	0-45℃ (However, no condensation)
power supply	AC100V-AC240V±10%
quality	About 20kg
External dimensions	220 × 680 × 358mm
accessories	・1 connection cable ・1 power cable ・1 cable clip ・Socket bolts (4 for M4×12 force gauge mounting, 2 for M6×12 jig mounting) ・Hexagon wrench M8 1 for M4 1 piece , 1 instruction manual, 1 warranty card
Compatible models (compatible digital force gauge)	FGP series (0.2-50), FGPX (0.2-50)