ĐỒNG HỒ SO ĐIỆN TỬ 543-350 12,7MM ; 0,001MM

Danh mục:

Đồng hồ so

Từ khóa:

3d vina , 543-350 , hiệu chuẩn , hiệu chuẩn thiết bị , máy đo 2d , máy đo 3d , máy đo cmm , sửa máy đo 2d , sửa máy đo 3d , sửa máy đo cmm

Vận chuyển giao hàng toàn quốc

Phương thức thanh toán linh hoạt

Gọi ngay 0974.692.294 để mua và đặt hàng nhanh chóng

Mô tả sản phẩm

Đồng hồ so điện tử 543-350

Thông số kỹ thuật đồng hồ so 543-350

Range:	12.7 mm
Digital step:	0,001 mm
Repeatability:	0,002 mm
Inch-Metric:	Metric
Max. Permissible Error (Total Range):	0,003 mm
Hysteresis:	0,002 mm
Type:	EN ISO Standard
Mass:	285 g
Data output:	Yes
Measuring force:	≤2,5 N N
Scale:	Capacitance type, ABSOLUTE linear encoder
Max. response speed:	Unlimited
Stem Ø:	8 mm
Contact point:	Carbide ball, thread M 2.5 x 0.45 mm
Alarm:	Counting value composition error, overflow error, tolerance limit setting error
Power supply:	5 – 24 V DC / 100mA (max)
Display:	LCD, character height 8 mm
Protection:	IP54
Max. response speed:	Unlimited
Measurement frequency (MAX/MIN/RANGE):	Standard mode: 100 times/s (plunger speed max. 0.1mm/s for peak measurement)
Delivered:	With signal cable 4 m. One end is fixed to the main unit. no connector is supplied for the other end.
Counting direction switchable:	Yes
Signal output: (+NG, OK, -NG):	Yes
Signal input: No-voltage input, (PRESET_RECALL/ZERO, HOLD_RESET):	Yes
ZERO/ABS:	Yes
GO/±NG judgement:	Yes
ON/OFF:	Yes
GO/±NG judgement via LED:	Yes
GO/±NG judgement on LCD:	Yes
MAX/MIN/RANGE:	Yes
PRESET 3x:	Yes
Analog bar resolution switchable:	Yes
Function lock:	Yes
Calculation function (with formula):	Yes
Digital/Analog:	Digital

This is an externally-powered Digimatic Indicator with a N-ch open drain –NG, OK, +NG output.

Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54)
Measures MAX/MIN/RANGE (run-out value).
Saves three different Preset and Tolerance settings.
Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE)
Calculation function Ax. Coefficient A freely definable, x = displacement of the plunger
Analogue bar graph in the display (12 different scales switchable)
GO/±NG tolerance judgment function

Catalogue: 543-350

Đánh giá

Chưa có đánh giá nào.

Đánh giá sản phẩm

Viết đánh giá