Indoor Remote Radiation Sensing and Mapping

Flyability has launched the Elios 2 RAD, an indoor drone equipped with a radiation sensor made just for inspections at nuclear stations. “The Elios 2 RAD represents the first chapter in our efforts to create indoor drones targeted specifically for each of our key verticals, accelerating our mission to use robots instead of people for dangerous indoor inspection jobs,” says Patrick Thévoz, CEO of Flyability. “The Elios 2 RAD has the potential to significantly reduce the need for inspectors to be exposed to harmful radiation or to the hazards of confined space entry for the purposes of conducting routine inspections.” Nuclear stations typically have personnel devoted to maintaining low radiation exposure levels following the ALARA (As Low As Reasonably Achievable) requirements. The Elios 2 RAD is designed to help them in their mission to reduce radiation exposure wherever possible. It does this both by taking the place of personnel where possible for visual and radiation data collection, and by providing high-quality data for planning interventions that do require exposure, so that it can be kept to a minimum. Equipped with an energy Geiger-Muller detector, the Elios 2 RAD can detect radiation while in flight through Flyability’s piloting app. After the inspection flight, nuclear engineers can use Flyability’s Inspector 3.0 software to map the radiation along the flight path of the drone, showing the exact location of dangerous dose levels within a nuclear facility. They can also play back the inspection flight within Inspector 3.0, using it to see dose rate measurements displayed synchronously on top of the video footage. Flyability already has a strong presence at nuclear facilities around the world, where its Elios 2 has been tested successfully at up to 800 R/H. Nuclear inspectors have reported using the Elios 2 to save six figures in a single inspection flight by reducing downtimes and avoiding the need for scaffolding and other costly temporary structures. Further, inspectors state that these results are not unique, but are in fact repeatable and a regular part of the new workflows the Elios 2 enables. “Over 80% of U.S. nuclear operators already use Flyability’s indoor drones for their visual inspections,” says Alexandre Meldem, VP of Sales at Flyability Inc. “Now we can expand that support by allowing engineers to collect actionable, high quality dose data. Helping nuclear inspectors collect this data remotely means that less people will be exposed to the potential harm of radiation.” Last year, Flyability released footage of a flight taken with its Elios drone at the Chernobyl disaster site. The goal of that mission was to collect visual data within Reactor 5, which was never activated, in order to confirm that no nuclear fuel bars were present. Now, with the Elios 2 RAD, it would be possible to return and not just see whether any bars remained, but also record the amount of radiation present throughout the entire site. For more information: www.flyability.com


Bài viết liên quan

Tin mới nhất

3D Vina Bàn Giao Máy Đo 2D VMM Rational Cho Tập Đoàn TCL Tại VSIP 2 Bình Dương 3D Vina Bàn Giao Máy Đo 2D VMM Rational Cho Tập Đoàn TCL Tại VSIP 2 Bình Dương
Kiểm tra độ tin cậy cho sản phẩm điện tử tại Trung Quốc Kiểm tra độ tin cậy cho sản phẩm điện tử tại Trung Quốc
Thiết bị đo lường điện là gì? Thiết bị đo lường điện là gì?
Kiểm tra pin Lithium-Ion: quy trình, tiêu chuẩn và an toàn Kiểm tra pin Lithium-Ion: quy trình, tiêu chuẩn và an toàn
Kiểm tra sốc cơ học Kiểm tra sốc cơ học
Sự khác biệt giữa thử nghiệm sốc nhiệt và thử nghiệm chu kỳ nhiệt độ là gì? Sự khác biệt giữa thử nghiệm sốc nhiệt và thử nghiệm chu kỳ nhiệt độ là gì?
Buồng thử nghiệm khả năng chịu nhiệt độ nóng lạnh – Buồng sốc nhiệt Buồng thử nghiệm khả năng chịu nhiệt độ nóng lạnh – Buồng sốc nhiệt
Tại sao nên kiểm tra khả năng chống cháy của sản phẩm? Tại sao nên kiểm tra khả năng chống cháy của sản phẩm?
Hiệu chuẩn thiết bị đo lường là gì? Hiệu chuẩn thiết bị đo lường là gì?
Máy đo độ cứng di động: công nghệ tiên tiến trong quá trình kiểm tra công trường Máy đo độ cứng di động: công nghệ tiên tiến trong quá trình kiểm tra công trường
Máy kiểm tra độ cứng: Hiểu rõ về các lựa chọn để đạt được kết quả tốt nhất Máy kiểm tra độ cứng: Hiểu rõ về các lựa chọn để đạt được kết quả tốt nhất
Ứng dụng của tủ thử nghiệm áp suất thấp/mô phỏng độ cao Ứng dụng của tủ thử nghiệm áp suất thấp/mô phỏng độ cao
Một số lỗi thường gặp ở tủ thử nghiệm môi trường Một số lỗi thường gặp ở tủ thử nghiệm môi trường
Tensile Strength là gì? Giới hạn độ bền kéo của vật liệu Tensile Strength là gì? Giới hạn độ bền kéo của vật liệu
Tensile strength là gì? Tổng quan về độ bền kéo vật liệu Tensile strength là gì? Tổng quan về độ bền kéo vật liệu
Giải thích hoạt động của buồng thử nghiệm chống bụi Giải thích hoạt động của buồng thử nghiệm chống bụi
Ứng dụng và tiêu chuẩn thực hiện trên máy kiểm tra độ bền kéo Ứng dụng và tiêu chuẩn thực hiện trên máy kiểm tra độ bền kéo
Phương pháp kiểm tra độ bền kéo đứt vải, giấy, nhựa Phương pháp kiểm tra độ bền kéo đứt vải, giấy, nhựa
Máy kiểm tra vạn năng UTM – Kiểm tra độ bền kéo Máy kiểm tra vạn năng UTM – Kiểm tra độ bền kéo
Buồng nhiệt độ độ ẩm và cấu tạo của nó Buồng nhiệt độ độ ẩm và cấu tạo của nó